Pajero ManualV60 · V80

← Zurück zur Suche

HINWEISE ZUR MESSUNG AN STECKVERBINDERN

Handbuchseite – für volle Größe antippen

Fahrzeugdaten

Fahrzeug: V80

BEI PRÜFUNG MIT ANGESCHLOSSENEM STECKVERBINDER
Spezialwerkzeuge wie Prüfkabel, Kabelbaumsteckverbinder oder Prüfkabelsatz verwenden.
BEI PRÜFUNG MIT ANGESCHLOSSENEM STECKVERBINDER
Die Prüfung durch Einführen einer Prüfspitze von der Kabelbaumseite aus durchführen. Wenn der Steckverbinder zu klein zum Einführen einer Prüfspitze ist (z. B. Steuergerätsteckverbinder), die Prüfspitze nicht gewaltsam einführen. Das Spezialwerkzeug, die extrafeine Prüfspitze (MB992006), verwenden.
HINWEISE ZUR MESSUNG AN STECKVERBINDERN
Handbuchabbildung – für volle Größe antippen
BEI PRÜFUNG MIT ABGEZOGENEM STECKVERBINDER
Den Prüfkabelsatz (MB991219) aus dem Spezialwerkzeug-Kabelsatz (MB991223) verwenden.
HINWEISE ZUR MESSUNG AN STECKVERBINDERN
Handbuchabbildung – für volle Größe antippen
BEI PRÜFUNG MIT ABGEZOGENEM STECKVERBINDER
Den Kontakt direkt mit der Prüfspitze berühren.
HINWEISE ZUR MESSUNG AN STECKVERBINDERN
Handbuchabbildung – für volle Größe antippen
Englisches Original anzeigen

CONNECTOR MEASUREMENT SERVICE POINTS

IF INSPECTING WITH THE CONNECTOR CONNECTED
caution Never insert a test probe from the harness side, as this will reduce the waterproof performance and result in corrosion.
Use the special tools such as test harness, harness connector or check harness.
CONNECTOR MEASUREMENT SERVICE POINTS
Handbuchabbildung – für volle Größe antippen
IF INSPECTING WITH THE CONNECTOR CONNECTED
Inspect by inserting a test probe from the harness side. If the connector is too small to insert a test probe (e.g. control unit connector), do not insert it forcibly. Use special tool extra fine probe (MB992006).
CONNECTOR MEASUREMENT SERVICE POINTS
Handbuchabbildung – für volle Größe antippen
IF INSPECTING WITH THE CONNECTOR DISCONNECTED
caution Use special tool inspection harness (MB991219). If the test bar is inserted forcibly, it will cause a poor contact. If the connector is disconnected, a diagnosis code may be set for the system to be checked or other systems.
Use inspection harness (MB991219) of special tool harness set (MB991223).
CONNECTOR MEASUREMENT SERVICE POINTS
Handbuchabbildung – für volle Größe antippen
IF INSPECTING WITH THE CONNECTOR DISCONNECTED
caution Be careful not to short the connector pins with the test bars. To do so may damage the circuits inside the ECU. If the connector is disconnected, a diagnosis code may be set for the system to be checked or other systems.
Touch the pin directly with the test bar.
CONNECTOR MEASUREMENT SERVICE POINTS
Handbuchabbildung – für volle Größe antippen
Passende Stelle im V60-Handbuch

Passende Ersatzteile

Für fahrzeugspezifische Teilenummern zuerst ein Fahrzeug im Konto auswählen.

Passende Handbuchstellen

Keine passende Handbuchstelle gefunden.

Kommentare

Kommentare werden geladen …

Registrieren oder anmelden, um zu kommentieren